MixVibes VFX CONTROL Manuel d'utilisateur télécharger pdf (Page 38)

CMJ

vibe-watermark-bright.pdf 03/04/2009 16:07:52vibe-watermark-bright.pdf 03/04/2009 16:07:52

9 Preferences

9.3 Soundcard

This menu lets you deﬁne which audio hardware you will use, the number of devices, and the latency time.

Depending on your hardware, a latency time that is set too low can affect media playback. If you experience sound cuts,

progressively increase latency until the problem is solved. If you feel an important delay between your actions within MIXVIBES

VFX and their effect on the sound, reduce it.

In ASIO mode, press the setup button to select audio outputs. Press the control panel button to access to the soundcard driver

control panel.

You can also set up the monitoring: this is useful if you do not use an external mixer. In the example below, the soundcard

audio output 1/2 connects to your sound system’s MASTER input and output 5/6 is used to connect your headphones. You only

have to set up your players on output 1 and click on the monitoring button to monitor a media in the appropriate player.

CMY

audio_1.pdf 06/11/2009 14:43:40

Soundcard

9.4 Vinyl/CD input

TIME CODE CALIBRATION

This menu lets you

conﬁgure the vinyl or CD inputs

to use vinyl turntables or CD players with an external audio interface.

1 Select the type that you will be using: vinyl or CD.

2 Select the mode.

3 Select the audio interface.

4 Select the audio inputs corresponding to the decks that will playback the control vinyl/CDs.

5 Start the playback of the control records making sure that the pitch is set to zero on your decks and the playback

direction is forward. If your decks have a Master Tempo function or any on-board effects, make sure they are also

disabled as those will interfere with the calibration, and with the time code in general. Finally click the

Calibrate

buttons.

OPTIONS

Type: chooses what kind of controller is connected to the channel: turntable or CD player.

Mode: chooses the control mode of your turntables or CD players.

•

Absolute: in this mode, the playback position of the control record/disc corresponds precisely with the playback position

of the audio ﬁle in the player. Use the Absolute mode when you want to use your turntable’s tonearm (or the seek

function on your CD) to skip thru the track. If you are using CD decks, you can use their cueing and looping capabilities

as well.

•

Relative time: needle drop support. Needle drop is proportional to the vinyl time. If you want to go to the middle of the

song, place the needle to the middle of the vinyl record. In this mode, MIXVIBES VFX will not update the position of the

song if there are needle small moves. Then the position in the vinyl and the song can be different. With this mode, you

can loop or skip to location (cue point). This mode is interesting for mixing.

38 / 44

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire

MixVibes VFX CONTROL Manuel d'utilisateur Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel d'édition audio MixVibes VFX CONTROL